- Finished product and Aggregate separator:
There are a lot of tiny parts and aggregate, which are connected or mixed together during injection molding, and manual separation must be wasted. Common separation methods are: Manipulator separation method, it is directly clamped and separated after each molding. Spiral separation method, according to the size of the material and the finished product, design the spiral pitch and depth, and separate after continuous rotation. In the way of roller spacing, the distance between two rollers can be adjusted appropriately, and the materials passing by the rollers in the same direction can be separated. Dial plate rotation method, rotate the dial to adjust the appropriate height, and the protrusion can be moved aside to form a separation.