Home > Products > Granulator & Crusher Shredder& Pulverizer > Silent & Low Speed Granulator for AH-series

Silent & Low Speed Granulator for AH-series

Blades of AH-series proceeds primary granulating and fine granulating at the same time. The advanced double-edge design on cutter minimizes the resistance of material and improves the cutting. After primary crushing, the material requires only low speed(25-30rpm), low motor power(1-5HP) to have the result of low noise, little dust, and even granulated material. (There are 4x4.5mm and 6x7mm optional tooth roller cutter) Especially suitable to apply AH series that the work requirements are to operate the machine at night time or low-noise environment.

    • AH-360A
      • TOOTH CUT SIZE: 5*5.5mm/6*7mm
      • INLET SIZE: 348*260mm
      • R.P.M.: 30rpm
      • POWER: 3 HP
      • MACHINE WEIGHT: 250kg
      • MACHINE SIZE: 830*560*1300mm
      • CAPACITY: 40~120kg/hr
      AH-360B
      • TOOTH CUT SIZE: 5*5.5mm/6*7mm
      • INLET SIZE: 350*320mm
      • R.P.M.: 30rpm
      • POWER: 3 HP
      • MACHINE WEIGHT: 320kg
      • MACHINE SIZE: 760*920*1600mm
      • CAPACITY: 50~130kg/hr
      AT-1500F
      • TOP TIER POWER: 10HP*2
      • TOP TIER INLET SIZ : 1500*390mm
      • TOP TIER R.P.M.: 30rpm+60rpm
      • TOP TIER CLAW CUTTING: 14pcs
      • TOP TIER STATIONARY CUTER: 13pcs
      • TOP TIER ROTATING DIAMETER: Ø380mm
      • BOTTOM TIER POWER: 5-7.5HP
      • BOTTOM TIER ROTATING DIAMETER: Ø480mm
      • BOTTOM TIER INLET SIZE: 400*240mm
      • BOTTOM TIER R.P.M.: 450/530rpm
      • BOTTOM TIER CLAW CUTTING: 6pcs<3 claws>
      • BOTTOM TIER STATIONARY CUTER: 2pcs<2*2>
      • MACHINE SIZE: 2610*3690*2710mm
      • MACHINE WEIGHT: 580kg
      • CAPACITY: 220~280kg/hr
      • CONTENTS: optional blower for 45HP

Sitemap Plastic Granulator Shredder Equipment Single Twin Shaft Shredder Equipment
Plastic Edge Recycling System